ARAG Bravo 180S Series, Installation, Use And Maintenance Handbook

Page: 16 / 42

16
Par.10.2
Shifting
of the cursor Quits the menu or
the data change Confirms access to menu
or data change Menu item scrolling or
Data increase/decrease
10 SETUP
10.1 Computer switching on/off
• Ordinary switching on
Bravo 180S
SPR Ver 1.8.0
Software version
- - - - - M e n u - - - - -
--- Spraying ---
Fig. 20
Keep key
ESC
pressed until switching on the display: after the software version, Bravo 180S displays the job screen (Fig. 20).
• Switching on to activate the advanced setup
Bravo 180S
SPR Ver 1.8.0
- - - - - M e n u - - - - -
--- Advanced ---
Software version Job screen
Fig. 21
Contemporaneously press the key sequence until switching on the Bravo. Release key
ESC
keeping pressed the arrow keys until the display shows the
Advanced menu
(Fig. 21).
• Switching off
Power OFF...
Release ESC key
Fig. 22
Keep key
ESC
pressed until the display shows the message
Power OFF... Release ESC KEY
Release the key and wait for the saving process to complete (Fig. 22); after a few seconds the computer turns off.
During switching off do NOT press any other key and do NOT disconnect the power supply until Bravo 180S turns off.
WARNING: ALWAYS use the special key to switch off the computer; otherwise ALL data concerning the spraying and the
programming will be lost.
SETUP