33
USE
14.3
Application rate regulation
Bravo 180S regulates the chemical products output in two different ways.
Press the
AUTO
key to select the desired mode: the type of active regulation during the job will be displayed.
14.3.1 Automatic operation
(DEFAULT)
Fig. 84
Bravo 180S keeps the set application rate constant regardless of the changes in
speed and boom section status.
If necessary, during spraying, it is possible to intervene on the
dedicated switch to adjust output to crop conditions, increasing or
decreasing momentarily the application rate up to ±50%.
Press
RATE
to restore the set output value.
1
Enable the automatic operation.
2
Open the desired section valves.
3
Position the tractor at the beginning of the field to be sprayed.
4
Turn the main switch to ON.
5
Start the treatment.
6
Use the control valve switch to temporary change the application rate.
Par.13.2.1 Keys to check the computer and the spraying phases
Par.13.2.2 Operating switches for control unit valves
Par.13.2.3 Operating switches for hydraulic valves
Par.13.1 Display
14.3.2 Manual operation
Fig. 85
Rate manual regulation shall be carried out with the suitable switch.
1
Enable the manual operation.
2
Open the desired section valves.
3
Position the tractor at the beginning of the field to be sprayed.
4
Turn the main switch to ON.
5
Start the treatment.
6
Use the control valve switch to adjust the desired quantity.
Par.13.2.1 Keys to check the computer and the spraying phases
Par.13.2.2 Operating switches for control unit valves
Par.13.2.3 Operating switches for hydraulic valves
Par.13.1 Display
14.4
Automatic closure of the main valve
BRAVO 180S can automatically switch off the main valve through an external ARAG* navigator: the navigator can autonomously manage valve opening
and closing, thus preventing the overlapping of already-sprayed areas.
To be able to use the automatic closure, connect the navigator to BRAVO 180S and perform the procedure for AUTOMATIC
operation (par. 14.3.1): fur further information, refer to the specific instructions enclosed with the satellite navigator.
WARNING: automatic closure is NOT active during manual operation
.
*: SKIPPER navigator and BRAVO 400S and DELTA80 monitors are enabled for operation
.
Summary of Contents for Bravo 180S Series
Page 41: ...Notes 41...
