ARAG Bravo 180S Series, Installation, Use And Maintenance Handbook

Page: 26 / 42

26
Par.10.2
Shifting
of the cursor Quits the menu or
the data change Confirms access to menu
or data change Menu item scrolling or
Data increase/decrease
12.1 Jobs setup
In this menu it is possible to set 10 different types of treatments.
Job 1/10
32.1 GPA
  
Job number
Fig. 59
- First select the job to be set (Fig. 59).
Rate Type
Constant
  
Fig. 60
- After selecting the job, the computer automatically passes to the setting screen of
Rate Type
*
for the selected
treatment (Fig. 60):
Constant
: Bravo 180S carries out the treatment by keeping the set application rate.
Variable
: with the
Variable
option, BRAVO 180S changes the output according to the data sent by the Skipper
satellite navigator (duly connected), that indicate the exact quantity of fluid to be sprayed in each point of the field.
- Press
OK
to automatically pass to the setting screen of the other parameters (Fig. 61).

Variable rate

par. 11.6
* MENU VISIBLE ONLY WITH SPECIFIC SETTINGS:
TO VIEW IT, ENABLE THE INDICATED OPTION.
(01) 10.7 GPA
ISO Orange

Job number
A
B** C**
Fig. 61
A
Set application rate: set the application rate for the selected treatment.
B** Type of nozzle: set the type of nozzle (
ISO
or
USR
).
C**
Nozzle: select the nozzle among those available in the
ISO
or
USR
type.
The
RATE
key allows passing from one setting to the other; the value that can be modified blinks.
Press
OK
, in this screen, to confirm the setting of the entire job and automatically go back to the job selection (Fig. 59).
- Repeat the setup FOR EACH job (set the used types and disable the others).

Flow calculation
>
Pressure sensor
par. 11.13
Press. calc.

par. 11.14
** MENU VISIBLE ONLY WITH SPECIFIC SETTINGS:
TO VIEW IT, ENABLE ONE OF THE INDICATED OPTIONS
USER SETTING
*