Aquaread Aquaprobe AP-700 Instruction Manual Download Page 118 | Manualshive

Page: 118 / 141

background image

Aquaprobe

®

AP-700, AP-800 & AP-2000 Instruction Manual

10401-00870 Rev R

18.13. Exporting Excel

®

Files

To export an Excel

®

file, click on the ‘

Export as Excel File

’ button. You will be asked to

specify a file name. A .xls extension will automatically be added. Excel

®

files are exported

in a Tab delimited text format. This means that each data field is separated by a Tab, and
each data record appears on a new line.

Excel

®

files are saved with a .xls extension and can be opened directly in Microsoft

®

Excel

®

.

When opening a .xls file created by AquaLink for the first time, Excel

®

may automatically

run a ‘Text Import Wizard’. Follow the three simple steps to import the file. Save the file
afterwards as a ‘Microsoft Excel Workbook’.

18.14. Exporting Google™ Files

To export a Google™ file, click on the ‘

Export as Google File

’ button. You will be asked to

specify a file name. A .kml extension will automatically be added.

Please note: only data

logged with a valid GPS position can be exported to Google™ files.

Google™ files are exported in Google’s proprietary Keyhole Markup Language with a .kml
extension, and can be directly imported into Google™ Earth, where the data is overlaid on
satellite images.

18.15. Importing Files into Google™ Earth

To view your files in Google™ Earth, you will need to log on to the Google™ website and
install the Google™ Earth application on your computer. This is free of charge at present.

Once you have downloaded Google™ Earth and have it running, either double click on
your .KML file or follow these steps:

1. Click on ‘

File

’.

2. Select ‘

Open

’ from the list.

3. Browse for the .KML file you exported from AquaLink, and select it.

You will now be able to view your data overlaid on Google™ Earth Satellite images. Each
data point is represented by a yellow pushpin, and all the data points are listed in a column
on the left of the screen. To view the data associated with each pin, either click on the pin
or click on the data point in the list.

Please note: Although you have downloaded the Google™ Earth application and are
running it from your PC, you still need to be connected to the Internet in order for the
application to access satellite images.

A typical Google™ Earth image follows.

© 2017 Aquaread

®

Ltd.

www.aquaread.com

Page 118 of 141

«
...
116
117
118
119
120
...
»

Summary of Contents for Aquaprobe AP-700














































































































































Reviews:

No comments

Related manuals for Aquaprobe AP-700

Brand: Sensia Pages: 16

Brand: Burkert Pages: 192

Brand: AccuMac Pages: 10

Brand: bentrup Pages: 9

Brand: Mic Pages: 2

Brand: BD Sensors Pages: 4

Brand: Roland Pages: 2

Brand: Karman Pages: 2

Brand: Interacoustics Pages: 54

Brand: PCB Piezotronics Pages: 10

Brand: VOX Amplification Pages: 16

Brand: Danfoss Pages: 16

Brand: Ibravebox Pages: 32

Brand: OmegaWatt Pages: 9

Engine Analyzer Series

Brand: ACCEL DFI Pages: 39

Brand: Omega Pages: 15

Brand: TASKING Pages: 12

Brand: PCB Piezotronics Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands