Aquacal HeatWave SuperQuiet SQ120R, Installation Manual

Page: 3 / 145

Table of Contents
Contacting AquaCal AutoPilot, Inc. 1
Safety Instructions 1
1 - Installation 3
1.1 Positioning Equipment 4
1.2 Clearances 5
1.3 Dimensions 6
1.4 Plumbing 7
1.4.a Plumbing Requirements 7
1.4.b Plumbing Diagrams 7
1.4.c Water Connections to Heat Pump 10
1.4.d In-Line Chlorine Feeders 11
1.4.e Water Flow Rates 11
1.4.f Adjusting Water Flow Using ΔT (Delta-T) 13
1.4.g Maintaining Ability to Winterize 15
1.4.h Adjusting Water Pressure Switch 15
1.5 Electrical 16
1.5.a Electrical Requirements 16
1.5.b Incoming Power Access Holes 19
1.5.c Access Panels 20
1.5.d Verifying Transformer Setting 21
1.5.e Three-Phase Adjustment 22
1.5.f Schematic Location 22
1.6 External Equipment 23
1.6.a Connecting a Call Flex 23
1.6.b Connecting a Chlorinator 25
1.6.c Connecting External Controllers to Heat Pump 26
c.1 Connecting Smart Bus Controllers 27
c.2 Connecting Two-wire Controllers (with internal thermostat) 31
1.6.d Connecting Gas Backup Heater to Heat Pump 33
1.6.e Connecting Multiple Heat Pumps (Master / Slaved) 39
1.6.f Connecting a Pool/Spa Switching Relay 44
1.7 Program Heat Pump for the Customer 47
1.7.a Setting Date and Time 47
1.7.b Setting Time and Date Format 48
1.7.c Selecting Celsius or Fahrenheit 52
1.7.d Configure Variable Speed Compressors 53
1.7.e Setting Entry Code Option 58
1.7.f Using Entry Code to Access Heat Pump 60
1.7.g Resetting Factory Defaults 60
1.8 Cleaning Equipment After Installation 62
2 - Troubleshooting 64
2.1 Fault Codes 65
2.2 Issues and Resolutions 71
3 - Appendix 78
3.1 Factory Defaults 78
3.2 Identifying Model Specifications 79
i