Aquacal HeatWave SuperQuiet SQ120R, Installation Manual

Page: 29 / 145

Page - 25
1.6.b Connecting a Chlorinator
To support an AutoPilot ® ChlorSync chlorinator, select AquaCal ® heat pumps are equipped with a power
supply outlet on the front of the unit. The chlorination cell can be plugged directly into the heat pump without
the need for a ChlorSync power supply.
DANGER
Failure to heed the following will result in injury or death.
l
RISK OF ELECTRICAL SHOCK FROM ENERGY STORED IN CAPACITORS - MODELS EQUIPPED
WITH VARIABLE FREQUENCY COMPRESSOR DRIVES STORE ELECTRICITY EVEN AFTER THE
POWER HAS BEEN DEACTIVATED AT THE POWER BREAKER.
Wait for 2 minutes after the shut down
of equipment before servicing.
l
Deactivate power while routing wiring to control board.
l
Follow all National Electric Codes (NEC) and/or State and Local guidelines.
WARNING
Failure to heed the following may result in injury or death.
l
This section is only for qualified installers who are familiar with the swimming pool and spa safety standards.
l
The installer must be familiar with service industry techniques.
1
-
Ins
ta
lla
tion