Aquacal HeatWave SuperQuiet SQ120R, Installation Manual

Page: 5 / 145

Page - 1
Contacting AquaCal AutoPilot, Inc.
For further assistance, please contact the distributor or installer of this product.
If unavailable, please contact AquaCal ® for a partner in your area. To better assist you, please have the heat
pump model and serial number available.
l
See " Identifying Model Specifications " on page 79.
Product Information:
Website www.AquaCal.com
Phone (1) 727-823-5642
Hours 8-5 pm, Eastern M-F
Service Information:
Website www.AquaCal.com/request-heat-pump-service/
SAFETY INSTRUCTIONS
l
For personal safety, and to avoid damage to equipment, follow all safety instructions displayed on the equipment
and within this manual. Repair and service of heat pump must be performed by an authorized service center.
l
Warranties may be voided if the equipment has been improperly installed, maintained or serviced.
l
If service is deemed necessary, please contact AquaCal. See " Contacting AquaCal AutoPilot, Inc. " above.
SAFETY SIGNALS
Throughout this document, safety signals have been placed where particular attention is
required.
DANGER
Failure to heed the following will result in injury or death.
WARNING
Failure to heed the following may result in injury or death.
NOTICE
Failure to heed the following may result in damage to
equipment.
When installing and using your heat pump basic safety precautions must always be followed, including the
following:
DANGER
Failure to heed the following will result in injury or death.
l
The heat pump utilizes high voltage and rotating equipment. Use caution when servicing.
l
RISK OF ELECTRICAL SHOCK FROM ENERGY STORED IN CAPACITORS - MODELS EQUIPPED
WITH VARIABLE FREQUENCY COMPRESSOR DRIVES STORE ELECTRICITY EVEN AFTER THE
POWER HAS BEEN DEACTIVATED AT THE POWER BREAKER.
Wait for 2 minutes after the shut down
of equipment before servicing.
l
Follow all National Electric Codes (NEC) and/or State and Local guidelines.