88
can press the Prev or Next soft key.
4.6.25 Editing Prompt
Use the
,
soft keys to navigate to the Prompt parameter. Pressing the Edit
soft key will provide the following screen:
Press the “Edit” soft key and a blinking shaded black box (■) will appear notifying
you that characters can be inserted into the prompt field. Use the soft keys > and
to highlight the character you would like to use. Press the Select soft key to
accept the character. You can also use the numeric keypad to enter characters.
When the numeric keypad is used the number is inserted automatically and the
Select soft key is not needed. To delete a character use the Backspace key <- -
located on the numeric keypad. There are 32 characters spaces available for the
prompt message. To save the prompt message press the <more> soft key which
will bring you to the following screen.
Press the Enter soft key to accept the prompt message. To cancel the prompt
message, press the Esc soft key. When the Enter soft key is pressed the prompt
is accepted and you transition into the next parameter: Step Cycle.
If you wish to bypass editing this parameter and move to the next parameter you
can press the Prev or Next soft key.
Summary of Contents for 00310XAC
