APT 00310XAC, Operation Manual

Page: 123 / 161

117
9.4.2
3Φ4W Queries
The following commands are used to query the instrument while in Polyphase
mode.
Command Description AC Program Mode AC Manual Mode
TDA?
Testing AØ meter data
Memory, Step, Status, Freq,
Volt, Curr, Power, APeak, PF,
Q, CF, VA, Timer
Memory, Status, Freq, Volt, Curr, Power,
APeak, PF, Q, CF, VA
TDB?
Testing BØ meter data
TDC?
Testing CØ meter data
TDE?
Testing ΣØ meter data
RDA XX?
Results AØ meter data
RDB XX?
Results BØ meter data
RDC XX?
Results CØ meter data
RDE XX?
Results ΣØ meter data
TDA?
Read the selected Phase A meter values while a test is in process. Query only
available in AC Program mode and AC Manual mode.
TDB?
Read the selected Phase B meter values while a test is in process. Query only
available in AC Program mode and AC Manual mode.
TDC?
Read the selected Phase C meter values while a test is in process. Query only
available in AC Program mode and AC Manual mode.
TDE?
Read the total (Phase A + B + C) meter values while a test is in process. Query
only available in AC Program mode and AC Manual mode.
RDA XX?
Read the selected Phase A results once a test has completed. Query only
available in AC Program mode and AC Manual mode.
RDB XX?
Read the selected Phase B results once a test has completed. Query only
available in AC Program mode and AC Manual mode.
RDC XX?
Read the selected Phase C results once a test has completed. Query only
available in AC Program mode and AC Manual mode.