CFS100 SERIES OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
Entire Contents Copyright
2016 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CFS100 Series Power Source Operation Manual
Page 75 of 146
To enter a memory name:
•
Press the “
<top>
” soft key to use the “>” soft key and “
∨
” soft key to move through
the character map.
•
When on the desired character in the character map, press the “
Select
” soft key to
choose the character. Repeat as needed with other letters.
•
If you use the numeric keypad the character will be entered automatically when the
keypad is pressed.
•
To delete a character, use back space
←
key on the numeric keypad.
•
The memory name can be no longer than ten (10) characters.
When done, press the “
<more>
” soft key to show the second part of this screen and press
the “
Enter
” soft key to confirm the new name.
This will return the user to Main screen.
6.11.3
Selecting a Program Step
To enter new or edit existing steps, press the “Step” soft key from the main menu. This will
display the Step setup screen as shown below.
To select a step press the Step soft key and the steps will sequence through. Each time the
Step soft key is pressed the step will increase by one increment. There are 9 steps available.
After the 9th step you will return to step number 1.
Summary of Contents for CFS108
Page 145: ......
