APS CFS108, Operation Manual

Page: 74 / 146

CFS100 SERIES OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
Entire Contents Copyright

2016 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CFS100 Series Power Source Operation Manual Page 74 of 146
cursor is on the desired memory location, press the “ <more> ” soft key to see the
bottom part of this screen and press the “ Load ” soft key to select the memory
number.
Either of these two selection methods will return the user to the Memory screen with the
newly selected memory location showing in the Memory = field.
6.11.2 Assigning a Name to a Memory Location
Naming a memory location makes it easier to remember what kind of test or for what EUT
the memory content was set up. Instead of remembering by number, the name can be
descriptive of the memories content and/or purpose.
Names can be assigned by selecting a memory location number and pressing the “
<more> ”
soft key to see the bottom part of this screen and press the “ Name ” soft key to enter name
assignment mode.
This will bring you to the character map for entering the memory name as shown on the
screen below. The numeric keypad may also be used to insert numbers 0 through 9 as part
of the memory name.