ANTES 24
ENGLISH
Instructions for use
Page 3
Page 3
Read the instructions carefully before using the product and
store them for future use
GENERAL SAFETY REGULATIONS
If correctly installed and used, the
ANTES 24
automated system will
ensure a high degree of safety. Some simple rules on behaviour can
prevent accidental trouble:
• Do not stand near the automated system, and do not allow children,
persons or things to do so, especially when it is operating.
• Keep radio-controls, or any other pulse generators that could invo-
luntarily activate the automated system, well away from children.
• Do not allow children to play with the automated system.
• Do not willingly obstruct gate movement.
• Prevent any branches or shrubs from interfering with gate movement.
• Keep the indicator-lights efficient and easy to see.
• Do not attempt to activate the gate by hand unless you have re-
leased it.
• In the event of malfunctions, release the gate to allow access and
wait for qualified technical personnel to do the necessary work.
• When you have set manual operation mode, cut power to the system
before restoring normal operation.
• Do not in any way modify the components of the automated system.
• Do not attempt any kind of repair of direct action whatever and
contact qualified personnel only.
• At least every six months: arrange a check by qualified personnel of
the automated system, safety devices and earth connection.
DESCRIPTION
The
ANTES 24
automated system is ideal for controlling vehicle access
areas in residential ambients.
ANTES 24
for sliding gates is an electro-mechanical operator which
transmits motion to the leaf via a rack and pinion.
For details on sliding gate behaviour in different function logics, consult
the installation Technician.
Automated systems include safety devices (photocells) that prevent the
gate from closing when there is an obstacle in the area they protect.
The system ensures mechanical locking when the motor is not operating
and, therefore, installing a lock is unnecessary.
A handy manual release facility makes it possible to move the gate in
the event of a power cut or fault.
The warning-light indicates that the gate is currently moving.
MANUAL MODE OPERATION
If the gate has to be moved manually due to a power cut or fault of
the automated system, use the release device as follows:
• Cut power to the system.
• Using a coin, turn the lock clockwise until it stops (Fig. 1 ref.
햲
).
• Pull the lever as shown in fig. 1 ref.
햳
.
• Move the gate by hand.
Fig. 1
RESTORING NORMAL OPERATING MODE
Procedure for restoring normal operation:
• Cut power to the system.
• Position the gate at about halfway of opening travel.
• Take the release lever back into its position;
• Using a coin, turn the lock anti-clockwise until it stops;
• Restore power to the system.
When power is restored, command another complete ope-
ning cycle.
Before sending a pulse, make sure that the gate cannot be
moved manually.
Summary of Contents for ANTES 24
