Aprimatic AT 80/E, Mechanical Installation, Use And Maintenance Instructions

Page: 15 / 60

-
15
-
AT 80/E
SLIDING GATES
English
PRODUCT TECHNICAL FEATURES 1.
Geared-motor for use intensive on sliding gates. The
mechanical parts and the electric motor are in an oil, making
it possible to use the operator under the most severe
conditions.
Control unit on machine board. •
Safety against crushing : electro-mechanical limit switch •
and adjustable oil bath clutch (part of geared-motor).
Release lever with a customized key.
•
Installation requires the foundation plate and a support Kit •
(for fi xed or pivoting installation - see the Catalogue ).
Destined use and Working range 1.1
AT 80/E operator is designed to automate the movement of
max. 1200 Kg sliding gates for residential-use, or of max.
800 kg for condominium-use (pinion Z20 is necessary).
Any other use whatsoever is not authorised by
Aprimatic.
Caution
It is forbidden to use the product improperly or for different
aims than those intended.
It is forbidden to tamper with or modify the product in any
way whatsoever.
The product must only be installed with APRIMATIC
accessories.
Residual risks 1.2
Warning
!
Take care when the gate is opening as there is a risk of injury
of hands or other parts of the body in the operating area of
the operator gear.
Warning
!
The operator cannot be considered a supporting part or a
safety device of the gate; the gate must be provided with
adequate support systems and safety device.
Technical data 1.3
To see Tab.1.
Warning
!
The maximum weight of the gate is only a partial
parameter for determining the limits to use, as gate
sliding MUST also be taken into account.
Overall dimensions 1.4
To see Fig.1.
Supply inspection 1.5
Ensure that the package contains all the components listed
and check for damage. Make sure the model acronym
printed on the packaging corresponds to the one affi xed on
the gear motor (
Fig.2 ).
See the list of the
COMPONENTS SUPPLIED WITH THE OPERATOR
and
those to be
PURCHASED SEPARATELY
in Tab.2 and Fig.3 .
Fig.1
A primatic
S.p.A. MADE IN ITALY
TYPE : ............................
C.I. F
xx g/min
230V~ 50Hz xx W xx A
mm/sec
xxx Nm
AprimOil xx
/ IPxx
XXX X00000000xxxxxx
!
Fig.2
188
352.9
290
45
Ø 40
190
IB80* IF80*
42
35
5
2
T
AB
.1 -
TECHNICAL DATA
Single-phase power supply 230V 50Hz ± 6%
Max absorbed power 330W
Max accessories current supply 1 A
MAX WEIGHT OF GATE 1200 Kg (pinion Z16)
800 Kg (pinion Z20)
RATED THRUST FORCE
(1N = ~0,102Kg)
1400 N (Z16)
1120 N (Z20)
RATED WING SPEED 9,5 m/min (Z16)
12 m/min (Z20)
LUBRICANT quantity 1,25 l
LUBRICANT type AprimOil DN22
Degree of protection IP 44
Operating temperature -20 / +70 °C
Number of daily cycles Max. 50