APRILIA SR 125 - 1999, Manual

Page: 70 / 98

70 use and maintenance SR 50 - SR 125 - SR 150
!$*534).'
4(% 6%24)#!, (%!$,)'(4 "%!-
To rapidly check the correct direction of the
beam, place the vehicle on flat ground, 10
m away from a wall.
Turn on the low beam, sit on the vehicle
and make sure that the beam projected on
the wall is slightly under the horizontal line
of the headlight (about 9/10th of the total
height).
To adjust the headlight beam:
NOTE
For the versions
C % K
- _
it is not necessary to remove the
front cover.
◆
Remove the front cover, see p. 53 (RE-
MOVING THE FRONT COVER).
◆
Act on the suitable screw (1) by means
of a screwdriver.
◆
. C % K - _
Act on the suit-
able screw (2) by means of a screwdriv-
er.
By TURNING IT CLOCKWISE, you set
the beam upwards.
By TURNING IT ANTICLOCKWISE, you
set the beam downwards.
"5,"3
Carefully read p. 43 (MAINTENANCE).
a
WARNING
Risk of fire.
Keep fuel and other flammable sub-
stances away from the electrical com-
ponents.
a
CAUTION
Before changing a bulb, position the ve-
hicle on the centre stand, move the igni-
tion switch to position “
m
” and wait a
few minutes, so that the bulb cools
down.
Change the bulb wearing clean gloves
or using a clean and dry cloth.
Do not leave fingerprints on the bulb,
since these may cause its overheating
and consequent breakage.
If you touch the bulb with bare hands,
remove any fingerprint with alcohol, in
order to avoid any damage.
DO NOT FORCE THE ELECTRIC
CABLES.
.