APRILIA SR 125 - 1999, Manual

Page: 73 / 98

73 use and maintenance SR 50 - SR 125 - SR 150
#(!.').' 4(% &2/.4
$)2%#4)/. ).$)#!4/2 "5,"3
Carefully read p. 70 (BULBS).
◆
Position the vehicle on the stand.
NOTE
Before changing a bulb, check
the fuses, see p. 69 (CHANGING THE
FUSES).
To change the bulbs:
◆
Unscrew and remove the screw (1).
◆
Remove the protection screen (2).
NOTE
Upon reassembly, tighten the two
screws (1) carefully, in order not to dam-
age the protection screen.
◆
Press the bulb (3) slightly and rotate it
anticlockwise.
◆
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
#(!.').' 4(% 2%!2
$)2%#4)/. ).$)#!4/2 "5,"3
Carefully read p. 70 (BULBS).
◆
Position the vehicle on the stand.
NOTE
Before changing a bulb, check the
fuse, see p. 69 (CHANGING THE FUSES).
◆
Unscrew and remove the screw (4).
NOTE
While removing the protection
screen, proceed carefully in order not to
break the cog.
◆
Remove the protection screen (5).
NOTE
Upon reassembly, correctly posi-
tion the protection screen in its seat.
Tighten the screw (4) moderately and care-
fully, to avoid damaging the protection
screen.
◆
Press the bulb (6) slightly and rotate it
anticlockwise.
◆
Extract the bulb (6) from its seat.
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
NOTE
If the bulb socket (7) goes out of
its seat, insert it correctly, making the bulb
socket opening coincide with the screw
seat.