APRILIA SR 125 - 1999, Manual

Page: 24 / 98

24 use and maintenance SR 50 - SR 125 - SR 150
"!44%29 4//, +)4
#/-0!24-%.4
This compartment is positioned in the low-
er part of the vehicle, between the foot-
rests.
To reach it, proceed as follows:
◆
Insert the key (1) in the lock.
◆
Rotate th e key (1) clockwise, pull it and
remove the cover (2).
The tool kit (3) includes:
– n. 1 tool case
– n. 1 21 mm spark plug socket spanner
– n. 1 socket spanner rod
– n. 1 double-ended, cross-/cut headed-
screwdriver type PH size 2
– n. 1 screwdriver handle
– n. 1
.
4 mm hexagon spanner
– n. 1
.
8/10 mm socket spanner
"!' (//+
a
WARNING
Do not hang excessively bulky bags or
parcels to the hook, as this may serious-
ly compromise the manoeuvrability of
the vehicle or the movement of your feet.
The bag hook (4) is positioned on the front
part of the inner shield.
Max. allowed weight: 1.5 kg.
2%!2 -5$'5!2$ %84%.3)/.
The rear mudguard extension (5) is provid-
ed as standard equipment and can be in-
stalled if the vehicle is used on wet roads,
since it reduces the reach of the water
spray caused by the rear wheel.
NOTE
The rear mudguard extension (5),
complete with screws and relevant nuts, is
supplied as standard equipment and is
housed in the crash helmet/glove compart-
ment.
For the installation, see p. 56 (
.
INSTALL-
ING THE REAR MUDGUARD EXTEN-
SION), see p. 57 (
• +
INSTALLING
THE REAR MUDGUARD EXTENSION).
• +
$)2%#4)/. ).$)#!4/2
%84%.3)/.3
In the countries where the number plate
size is 280x280 mm, it is necessary to in-
stall appropriate extensions (6) for the di-
rection indicators.
NOTE
The direction indicator extensions
(6), complete with nuts and screws, are
supplied as standard equipment and are
housed in the crash helmet/glove compart-
ment.
For the installation, see p. 58 (
• +
IN-
STALLING THE DIRECTION INDICATOR
EXTENSIONS).