APRILIA SR 125 - 1999, Manual

Page: 58 / 98

58 use and maintenance SR 50 - SR 125 - SR 150
• +
2%-/6).' 4(% 7(/,%
$)2%#4)/. ).$)#!4/2
◆
Position the vehicle on the centre stand.
◆
Unscrew and remove the screw (1).
NOTE
When removing the protection
screen, proceed with care, in order not to
break the cog.
◆
Remove the protection screen (2).
NOTE
Upon reassembly, position the
protection screen correctly in its seat.
Tighten the screw (1) moderately and with
care, in order not to damage the protection
screen.
a
CAUTION
Handle with care.
Do not force the electric cables.
◆
Extract the bulb socket (3) as much as
necessary to disconnect its two electric
terminals (4).
NOTE
Upon reassembly, make the bulb
socket opening coincide with the seat of
the screw (1).
◆
Unscrew the screw (5) and take the rele-
vant nut.
a
CAUTION
Handle with care.
Do not force the electric cables.
NOTE
To remove the indicator support
(6), withdraw the cables one by one.
◆
Remove the indicator support (6) and
withdraw it from the cables (7).
• +
).34!,,).' 4(%
$)2%#4)/. ).$)#!4/2
%84%.3)/.3
The following information refers to one ex-
tension only, but is valid for both.
Repeat the operations on the opposite side
of the vehicle.
a
CAUTION
The direction indicators must be clearly
visible in order to ensure safety.
Install both direction indicator exten-
sions.