APRILIA SR 125 - 1999, Manual

Page: 72 / 98

72 use and maintenance SR 50 - SR 125 - SR 150
• +
#(!.').' 4(%
(%!$,)'(4 "5,"3
Carefully read p. 70 (BULBS).
The headlight contains:
– one parking light bulb (1);
– one low beam bulb (2);
– one high beam bulb (3).
To change the bulbs, proceed as fol-
lows:
◆
Remove the front inner shield, see p. 60
( R E M O V I N G T H E F R O N T I N N E R
SHIELD).
PARKING LIGHT BULB
a
CAUTION
Do not pull the electric cables to extract
the bulb socket.
◆
Manually move the protection element (4).
◆
Grasp the parking light bulb socket (5),
pull it and remove it from its seat.
◆
Withdraw the parking light bulb (1) and
replace it with a new one of th e same
type.
LOW BEAM BULB
◆
Manually move the protection element
(10).
◆
Withdraw the electric terminal (6).
◆
Release the check spring (7) positioned
at the rear of the bulb socket.
◆
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket,
making the relevant positioning seats coin-
cide.
a
CAUTION
Do not press the bulb cable with the
check spring (7).
◆
Correctly install a new bulb of the same
type.
HIGH BEAM BULBS
◆
Manually move the protection element (4).
◆
Withdraw the electric terminal (8).
◆
Release the check spring (9) positioned
at the rear of the bulb socket.
◆
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket,
making the relevant positioning seats coin-
cide.
a
CAUTION
Do not press the bulb cable with the
check spring (9).
◆
Correctly install a new bulb of the same
type.