APRILIA SR 125 - 1999, Manual

Page: 19 / 98

19 use and maintenance SR 50 - SR 125 - SR 150
#/.42/,3 /. 4(% 2)'(4 3)$%
/& 4(% (!.$,%"!2
NOTE
The electrical parts work only when the ignition switch
is in position “
n
”.
NOTE
The lighting system works only when the engine is run-
ning.
1) LIGHT SWITCH (
b
-
•
) (
_
not provided)
When the light switch is in position “
•
”, the lights are off; when
the switch is in position “
b
”, the rear parking light and the low
beam are on.
1a) LIGHT SWITCH (
a
-
b
- • )
C % K
When the light switch is in position “ • ”, the lights are off;
when the switch is in position “
b
” the low beam and the
parking lights are on; when it is in position “
a
” the high
beam and the parking lights are on.
1b) DIMMER SWITCH (
a
-
b
)
_
(not provided for those countries where the engine
stop switch
“
m
-
n
” is required)
When the dimmer switch is in position “
b
”, the low beam
and the parking lights are on; when it is in position “
a
”, the
high beam and the parking lights are on.
NOTE
The lights can be switched off only by stopping the
engine.
1c) ENGINE STOP SWITCH (
n
-
m
)
(in the countries where required)
a
CAUTION
Do not operate the engine stop switch “
n
-
m
” in running
conditions.
This is a safety or emergency switch. With the switch in po-
sition “
n
”, it is possible to start the engine; the engine can
be stopped by moving the switch to position “
m
”.
a
CAUTION
With stopped engine and ignition switch in position “
n
”,
the battery may run down.
When the vehicle has come to a halt, stop the engine, and
move the ignition switch to position “
m
”.
2) START PUSH BUTTON (
r
)
When the start push button is pressed and one of the brake
levers (front or rear) is activated at the same time, the starter
makes the engine run.
For the starting procedure, see p. 36 (STARTING).