APRILIA RSV 1000 R, Workshop Manual

Page: 76 / 308

FUEL SYSTEM
3 - 9
RSV 1000 R - RSV 1000 R FACTORY
sor status recognition / wait after
recognition / de-activated due to
driving / de-activated due to fault /
wait after interruption / lambda
sensor active / saturated
Long term adjustment de-
activation no / max tries / water temperature
over threshold / low battery voltage
/ TWLAD2 running / rpm or load
over threshold / TWLAD running /
long term adjustment completed /
short term carburetor adjustment
not active Reasons for de-activation of long term
adaptivity
Engine variant 1/2 1 if standard mapping is enabled, 2 if
racing mapping is enabled
Injectors per cylinder 1cil Not modifiable: 1cil must display
Cylinder head sensor no Not modifiable: no must display
Boost adjustment no Not modifiable: no must display
Lambda sensor yes Modifiable only with password – nor-
mally yes, i.e. lambda sensor present
Water injection no Not modifiable: no must display
Minimum motor present yes Modifiable only with password – nor-
mally yes, i.e. minimum motor present
Purge valve yes/no Modifiable only with password: must be
yes only for USA version
Electronic reverse no
Electric starting yes Not modifiable: yes must display
ECU
initialized
yes Indicates that the « ECU initialized »
parameter has been enabled. If the
ECU is replaced, this parameter must
be enabled
DEVICE AC-
TIVATION Errors reset
Fuel pump
Intake distribution
Lambda sensor heating
Fan
Purge valve Activation only for USA version
Front injector
Rear injector
Front coil
Rear coil
ADJUSTABLE
PARAME-
TERS Initialization To reset adaptive parameters when
changing the ECU / throttle body / in-
jectors (may stay at around 5000 rpm
for the first few seconds after ignition).
The engine ignition number counter
(frozen error parameters) is reset
Throttle position self-
teaching ECU throttle sensor and stepper motor
position self-teaching
CO adjustment 1 Modifiable only with password in case
the CO level cannot be balanced using
the throttle bypass screws
CO adjustment 2 Modifiable only with password in case
the CO level cannot be balanced using
the throttle bypass screws
Engine variant Set to 1 for standard mapping, 2 for
racing mapping
Lambda sensor Modifiable only with password: for de-
activating the lambda sensor inde-
pendently of the mapping type
Idling control motor present Modifiable only with password: for de-
activating the idling control motor
Purge valve Modifiable only with password: must be
yes only for USA version
ECU initialized Activation required for new ECU instal-