APRILIA RSV 1000 R, Workshop Manual

Page: 300 / 308

ELECTRICAL SYSTEM
7 - 12
RSV 1000 R - RSV 1000 R FACTORY
Connector B
Pin Description Signal type
1 ECU power (ground) Power
2 ECU power (ground) Power
3 Fan Power output
4 n.c.
5 Lambda sensor heater control Power output
6 Vehicle speed sensor signal Frequency input
7 n.c.
8 n.c.
9 Fall sensor signal Digital input
10 n.c.
11 ECU power (15) Power
12 Lambda sensor signal (ground) Power
13 ECU power (ground) Power
14 n.c.
15 Intake flap control Power output
16 n.c.
17 Injection relay control Digital output
18 n.c.
19 n.c.
20 Vehicle speed sensor power
(ground)
Power
21 Ignition request Digital input
22 n.c.
23 Side stand switch Digital input
24 Diagnostics line (K) Comms line
25 Clutch switch Digital input
26 Stop switch Digital input
27 CAN Line (L) Comms line
28 CAN Line (H) Comms line
29 Fuel pump control Power output
30 n.c.
31 Starter relay control Digital output
32 ECU power (ground) Power input
33 n.c.
34 n.c.
35 n.c.
36 Power 12 V Power
37 Lambda sensor signal Analogue input
38 n.c.
39 n.c.
40 Neutral gear switch Digital input
41 ECU power (ground) Power
20 HEAD LAMP
Low beam (halogen) 12 V – 55 W H11 x 2
High beam (halogen) 12 V – 55 W H11 x 2
Front parking light 12 V – 5W