![APRILIA RSV 1000 R Workshop Manual Download Page 62](http://html1.mh-extra.com/html/aprilia/rsv-1000-r/rsv-1000-r_workshop-manual_2956455062.webp)
GENERAL TECHNICAL INFORMATION
2 - 30
RSV
1000
R - RSV
1000
R FACTORY
To start the chronometer :
•
press and immediately release the LAP button. The
first time the button is pressed, the stop clock starts.
Pressing LAP again within the first 10 seconds will re-
set the chronometer. Pressing the LAP button again
starts a new lap; the previous lap time and number are
displayed for 10 seconds at the top left of the display.
At the end of the 10 seconds, the chronometer will dis-
play the second lap time and number.
IMPORTANT
Up to 40 laps can be stored; pressing the LAP
button after this does not start a new lap and the display will
automatically show the 40 stored lap times. To reset the
chronometer function the 40 stored laps must be reset.
•
To reset a stored time, enable the chronometer.
With the LAP button held down, press the – key for at
least 3 seconds.
•
The display will read “Ø1 LAP ØØ’ ØØ” ØØ ” to indi-
cate that all 40 stored laps have been set to zero.
•
Stored lap times are zeroed when the battery is dis-
connected from the vehicle.
To display the stored lap times :
•
Enable the chronometer function and hold down
TRIP/V for more than 3 seconds. To scroll through the
laps, press the +/- keys (forwards/back respectively).
•
To return to the chronometer function, press TRIP/V
again for more than 3 seconds.
DIAGNOSTICS
Whenever the ignition key is turned to “ ”, “
EFI
” is displayed
for 3 seconds.
WARNING
If “EFI” displays together with the warning led
( ) while the engine is running normally, the
ECU has detected a fault.
In most cases the engine will continue to oper-
ate although with reduced performance.
ENGINE OIL PRESSURE
Whenever the ignition key is turned to “ ”, the engine oil
pressure led turns on for 3 seconds.
WARNING
If the engine oil pressure icon stays on together
with the warning led ( ), after starting, or if it
turns on while the engine is running normally,
the engine oil pressure is insufficient.
In this case, stop the engine immediately.
Summary of Contents for RSV 1000 R
