APRILIA RSV 1000 R, Workshop Manual

Page: 299 / 308

ELECTRICAL SYSTEM
7 - 11
RSV 1000 R - RSV 1000 R FACTORY
19 ECU
ECU pinout
Connector A
Pin Description Signal type
1 Rear cylinder coil control Power output
2 n.c.
3 Atmospheric pressure sensor power
(5V) Power
4 Atmospheric pressure sensor power
(ground) Power
5 Engine speed sensor signal Frequency in-
put
6 n.c.
7 Air temperature sensor signal Analogue input
8 n.c.
9 n.c.
10 Minimum oil pressure sensor signal Digital input
11 Water temperature sensor signal Analogue input
12 Manifold pressure sensor signal Analogue input
13 n.c.
14 Purge valve control Power output
15 Front cylinder injector 2 control Power output
16 n.c.
17 n.c.
18 Atmospheric pressure sensor signal Analogue input
19 Engine speed sensor signal (ground) Power
20 Timing
sensor (ground) Power
21 Air temperature sensor signal Power
22 n.c.
23 n.c.
24 Throttle potentiometer signal Analogue input
25 Throttle potentiometer power
(ground) Power
26 n.c.
27 Water temperature sensor signal
(ground)
Power
28 Manifold pressure sensor power
(ground)
Power
29 n.c.
30 n.c.
31 n.c.
32 n.c.
33 Rear cylinder injector 1 control Power output
34 Timing sensor Analogue input
35 D stepper timing Power output
36 A stepper timing Power output
37 C stepper timing Power output
38 B stepper timing Power output
39 Throttle potentiometer power (5 V) Power
40 Manifold pressure sensor power (5
V)
Power
41 Front cylinder coil control Power output