APRILIA RSV 1000 R, Workshop Manual

Page: 58 / 308

GENERAL TECHNICAL INFORMATION
2 - 26
RSV 1000 R - RSV 1000 R FACTORY
2.1.8. DASHBOARD OPERATION
When the ignition key is turned to “ ”, the following will light
up on the dashboard for 3 seconds:
-
all segments of the multifunction display
- all indicator leds
- display backlighting
The revolution counter pointer (1) will move to the maximum
rpm set by the user.
After 3 seconds the red line led (2) will turn off and the revo-
lution counter pointer (1) will return to its initial position.
After the initial self-test, all instruments will indicate their real-
time current values.
WARNING
If “
ERR
” flashes on the dashboard instead of the
water temperature reading and if the stand and
red line leds turn on, then there is a communi-
cations problem on the can line between the
dashboard and the ECU.
After the first 1000 Km, the SERVICE icon will
be displayed on the multifunction display. It will
be displayed for a second time after 10,000 Km,
and every 10,000 Km thereafter.
To reset the SERVICE message, hold down the
+ and – keys for at least 15 seconds at key-ON.
When the ignition key is turned to “ ” the standard display
settings are:
- current
speed
- clock
- coolant
temperature
- odometer
METRIC SYSTEM DISPLAY (Km-mi, kph-MPH, °C-°F)
•
To switch between Km/mi, kph/mph, hold down the
TRIP/V and – keys for at least 15 seconds.
•
To switch between °C and °F hold down the TRIP/V
and + keys for at least 15 seconds.