12
Copy the archives to the USB memory
(operation available also in the
Memory and files
options
menu, chapter 12.6)
messages
Move the archives to the USB memory
- the files in the controller are deleted after they
have been copied
messages
Disable/Enable sound alarm
- change of the
Alarm sound signal
parameter to
Disabled
or
Enabled
(chapter 12.4.1,
Control and alarm options
menu ->
Output
...); after the
power supply is switched on, the sound signalling of active alarms is always switched on
or none
Start/Stop of control for all outputs
- after the power supply is switched on, the control status
is exactly the same as at the time of switching off the power supply (no change), (chapter 12.4)
or none
Touch panel lock
– touch screen and keypad lock (except for
[F]
)
or none
d)
functions of the screen elements in the presentation mode of the
Quick configuration screen
of the control
channel (chapter 11.7)
Button or touch
Description
or
[SP change]
or touching the area of the displayed measured value (
PV
) or setpoint value
(
SP
): change of the setpoint value selected with the
Setpoint (SP) selection
parameter
(chapter 12.4.1), limit of settings defined by parameters
Bottom
and
Top
of the range for
graphics and SP
(chapter 12.2)
[Start]
or
[Stop]
: Start or Stop of control with the icon signalling the
Control time
mode
(continuous:
or temporary:
and
); after the power supply is switched on, the button
is set in accordance with the
State of control after power up
parameter, chapter 12.4.1
function button
[F1]
programmable with the
F1 button and BIN input function
(select
SP1/SP2, set Auto/Manu, None
, etc.); a detailed description is given in chapter 12.4.1
11. DESCRIPTION OF DATA PRESENTATION ON THE LCD DISPLAY
The controller enables presentation of the measurement data in various modes in accordance with the following
diagram. The selection and methods of configuration of data for the displayed measurement channels are
described in chapter 12.2.
Fig. 11.
A block diagram of the available measurement data presentation modes (the detailed descriptions are
provided in successive chapters)
