22 DECADE user manual, edition 9
Parameters
Actor
(AUTO) PRGR
control
Controls the electrically actuated injector, during execution of a time file.
Forces this valve to load (‘LD’) or inject (‘INJ’) (see page 37).
ADD
(AUTO) PRGR
function
Adds the current data line to the time file. Confirmation is asked for if an
existing time is overwritten. As time 00’ 00” always exists, changing this time
results in an overwrite warning (see page 37).
AUTO
DC SET, PULS SET2
function
Enters the auto mode (‘AUTO SET’ screen) for editing and running a time file.
A-ZERO
DC STAT, AUTO RUN, PULS STAT, SCAN STAT
function
Sets the recorder and integrator output voltage to 0 V, or to the offset voltage
(see page 29).
Azero
(AUTO) PRGR
control
Controls the auto zero, which can be programmed in a time file (see page 37).
CELL=ON/OFF
DC SET, PULS SET2, SCAN SET
function
Toggles between cell ‘ON’ and ‘OFF’. If the cell is switched ON in the pulse
mode only E1 is applied, the pulsation starts when PULS STAT screen is
entered (see page 51). In the DC or scan mode, Eox./Ered. or Ecell is applied.
Software version 3.00 and higher, pulse mode: pulsation occurs as long as
the cell is on, irrespective which screen is selected.
Cy
AUTO RUN
status
Displays the cycle counter. In the master mode, if a time file has to be
executed more than once (‘Cycles’>1), this is the number of times a time file is
started (see page 37).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
