ANTAIRA STE-501C User Manual Download Page 45

Page: 45 / 51

User’s Manual Version 1.

Serial to Ethernet Device Server
STE-501C

Antaira Technologies, LLC

Appendix B: Upgrade System Firmware

New version of firmware can be downloaded from www.antaira.com

B.1 Upgrade Procedures

When one get a new software version, please follow the sequences below to upgrade ones STE-501C.

Connect a PC (Windows 95/98/NT/2000/XP) and STE-501C one wish to upgrade the firmware in the
same TCP/IP network. Use command

ping

monitor.exe

utility program to verify their availability.

Prepare the download tool and press any key to edit its configuration file

dapdl.cfg

. dapdl.cfg file can

be found in the product CD.

Edit the

"dapdl.cfg"

file to fit ones system need, the content of the file looks like as the following. Be

sure to save ones modifications after the change is made.

Remote_IP

10.0.50.100

Load

U5001ap.hex

The first line identifies the IP address of STE-501C, the second line identifies the firmware (.Hex file)
name to be downloaded.

Execute the utility program

download.bat,

it can be found in the product CD.

Input the user name and password credential, the new firmware will be downloaded.

STE-501C will automatically restart each time the firmware is successfully downloaded.

Summary of Contents for STE-501C



















































Search results

Summary of Contents for STE-501C

Reviews:

Related manuals for STE-501C

Brands by name

Popular brands

ANTAIRA STE-501C, User Manual

Search results

Summary of Contents for STE-501C

Reviews:

Related manuals for STE-501C

Brands by name

Popular brands