User’s Manual Version 1.
4
Serial to Ethernet Device Server
STE-501C
Copyright © 201
7
Antaira Technologies, LLC
All rights reserved.
13
3.2 Configuration by Telnet Utility
One can use Telnet utility to change configuration settings of STE-501C by following steps
：
3.2.1 Login to the System
->
Open Ms-DOS command prompt window
->
Telnet to STE-501C using command “
Telnet IP_address
”.( For example
：
Input
Telnet 10.0.50.100
in
Ms-DOS command prompt window).After telnet to STE-501C, system prompts for a password, the default
password is left it blank. (Figure 3.4)
Figure 3.4 Login to the system
Note:
One can press the default button of STE-501C to reset the password to the default value.
1. After verifying the password, the following terminal screen appears.( Figure 3.5)
Figure 3.5 Main menu
Note:
1. If STE-501C does not receive any command within 1
minute
, Telnet will be terminated automatically.
2. The changes of networking parameters will take effect only when one exit and restart STE-501C.
->
Select “
1
” from “
Input choice and enter (0~4):
” to enter overview page as following:( Figure 3.6)
