User’s Manual Version 1.
4
Serial to Ethernet Device Server
STE-501C
Copyright © 201
7
Antaira Technologies, LLC
All rights reserved.
32
4.2.2 Run Serial/IP on Monitoring PC
In the Window Start Menu, go to “Programs”, select “Serial/IP” and select “Control Panel”. When “Select
Port” windows pop-up, please select the serial port one want to configure. Then the configuration window
will appear. (Figure 4.4)
Figure 4.4 Serial/IP configuration
At the right side of Figure 4.4 is a sample
Virtual COM
Control Panel window. At the left side is the list of
the COM ports that one have selected (in the Select Ports window) for use by the
Virtual COM
Redirector. If one wish to change which ports appear in this list, use the
Select Ports
button.
Each COM port has its own settings. When one click on a COM port, the Control Panel display changes to
reflect the settings for that COM port.
Note:
When one change settings for a COM port, the changes are effective immediately. There is no
separate confirmation dialog to confirm or cancel ones changes.
4.3 Configuring Virtual COM Ports
One configure each Serial/IP COM port as follows: (Figure 4.5)
1.
Select a COM port in the list.
2.
For
IP Address of Server
, enter a numeric IP address for the serial server.
3.
For
Port Number
, enter the TCP port number that the serial server uses to provide its serial ports to
the network.
