User’s Manual Version 1.
4
Serial to Ethernet Device Server
STE-501C
Copyright © 201
7
Antaira Technologies, LLC
All rights reserved.
18
3.2.6 Configure STE-501C as UDP Client
For example the local port is 4660,
the destination IP is 10.0.29.254, destination port is
1234. ( Figure 3.12)
Figure 3.12 Link Mode-UDP client setup
3.2.7 COM Port Setting
Type
2
from “
Input choice and enter (1~4):
” of COM1, the following screen appears, one can then give
the COM port alias name, set the baud rate and parity, determine number of data bit and stop bit, and
decide if one want to use flow control and the type of flow control one want to use.( Figure 3.13)
Figure 3.13 Com port setting