User’s Manual Version 1.
4
Serial to Ethernet Device Server
STE-501C
Copyright © 201
7
Antaira Technologies, LLC
All rights reserved.
12
Figure 3.2 Static IP setup dialog window
3.1.2 Auto IP (Dynamic IP)
A DHCP server can automatically assign the IP address and network settings. STE-501C supports the
DHCP function. By default, the DHCP function on STE-501C is disabled; one can use Monitor.exe
software to search network information automatically by following steps
：
->Execute Monitor.exe(Figure 3.1)
->Click on the IP address of STE-501C in monitor
->Click “
Config
” button(It will pop-up Dialog Window)
->Check ”
Auto IP
” (Figure 3.3)
->Click “
Config Now
” button(The STE-501C will restart and get IP from DHCP server automatically)
Figure 3.3 monitor.exe Auto IP Dialog Window
