User’s Manual Version 1.
4
Serial to Ethernet Device Server
STE-501C
Copyright © 201
7
Antaira Technologies, LLC
All rights reserved.
33
4.
For
Server Credentials
, the default is
No Login Required
. If ones serial server does require a login
by the Virtual COM Redirector, the Virtual COM Redirector needs to provide a username and/or
password every time an application tries to use the serial server.
5.
Click the
Configuration Wizard
button and then click the
Start
button that appears in the wizard window.
This important step verifies that the Virtual COM Redirector can communicate with the serial server using the
settings one have provided. If the
Log
display does not show errors, click the
Use Settings
button in the
wizard, which makes the recommended settings effective and returns one to the Control Panel to continue with
the following steps.( Figure 4.5)
Figure 4.5 Configuration Wizard
6.
For
Connection Protocol
, the setting must match the TCP/IP protocol that the serial server
supports. The Configuration Wizard is usually able to determine the correct setting.
7.
For
COM Port Options
, the settings must match the COM port behavior expected by the PC
application that will use this COM port. The Configuration Wizard will recommend a combination of
settings.
