Anritsu Rubidium MG362 1A Series, Maintenance Manual

Page: 71 / 294

Performance Verification 4-5 Test Equipment List
MG362x1A MM PN: 10370-10386 Rev. B 4-5
BNC to SMA adapter BNC to SMA Adapter Any common source
Armored Semi Rigid Test Port
Cable K(m) to K(m) or semi-rigid
cables K(m) to K(m) flex cables
or
Semi-rigid cables
Anritsu SC3855 K(m) to K(m) flex cable
(Must be calibrated - See footnote
(b) (d)
)
or
Anritsu K120mm–60CM custom semi-rigid
cable
(Must be calibrated - See footnote
(b) (d)
)
Special Serial I/O Cable
Assembly Provides interface between the
MG362x1A
and the PC
Anritsu P/N: T1678
Adapter V male to K female Adapter V(m) to K(f) Anritsu 34VKF50
(Must be calibrated - See footnote
(b)
)
Adapter K male to
N female
(For power sensor SC7400 and
N5532B opt 504) Adapter K(m) to N(f ) Anritsu 34NFK50
(Must be calibrated - See footnote
(e)
)
Adapter N male to K female Adapter N male to K female Anritsu 34NKF50
(Must be calibrated - See footnote
(e)
)
Adapter N male to K female Adapter N male to K female Anritsu 34NKF50 (Must be calibrated - See
footnote
( c)
)
Armored Semi Rigid Test Port
Cable (K Connector Female to K
Connector Male) Armored Semi Rigid Test Port Cable (K
Connector Female to K Connector Male) Anritsu 3670K50-2
(Must be calibrated - See footnote
(b) (d)
)
Armored Semi Rigid Test Port
Cable (V Connector Female to V
Connector Male) Armored Semi Rigid Test Port Cable (V
Connector Female to V Connector Male) Anritsu 3670V50A-2
(Must be calibrated - See footnote
(c) (d)
)
a. Only needed if option 2X is installed.
b. Calibrated at the following data points: 100 kHz, 1 MHz, 10 MHz, 100 MHz, 500 MHz to 40 GHz in 500 MHz steps
c. Calibrated at the following data points: 100 kHz, 1 MHz, 10 MHz, 100 MHz, 500 MHz to 67 GHz in 500 MHz steps
d. These cables are not designed for repeated bending. Bend them into the desired shape, then avoid further bending.
e. Calibrated at the following data points: 100 kHz, 1 MHz, 10 MHz, 100 MHz, 500 MHz to 4 GHz in 500 MHz steps.
Table 4-1. Test Equipment List (4 of 4)
Instrument Critical Specification Manufacturer/Model