3-4 W1 Verification Application Installation
Using the 2300-584-R Software with the ME7838E
3-2
PN: 10410-00286 Rev. L
3656B W1 Cal/Ver Kit & 2300-584-R PVS UG
3-4
W1 Verification Application Installation
Prior to installation of the W1 Application, the National Instruments GPIB card and drivers must be installed
in the Windows PC.
This needs to be done only once per PC Controller. The software is contained on the
Disk supplied with each
Verification Kit.
1.
Prior to installation of the 2300-584-R PVS, the National Instruments GPIB card and its drivers must be
installed in the PC Controller.
2.
Turn off all other running applications on the PC Controller.
3.
Insert the USB Memory Device into the USB slot.
4.
Open
Windows Explorer
, browse to the USB Drive, and double click on
Startup.htm.
5.
On the navigation page, click the
Install Anritsu 1.0 mm Verification Application Software
link.
6.
The first of several installation dialog boxes appears
Note
In order to correctly install the PVS application, the user (logged in) must have Administrative rights
on the Windows PC Controller.
The PVS application is installed onto the PC Controller on an all-user basis.
If your organization does not allow for all-user installations, consult your internal PC and network
support group on how to best proceed.
Figure 3-1.
PVS Installation and Documentation Screen
Summary of Contents for 3656B W1
Page 2: ......
Page 12: ...Contents 10 PN 10410 00286 Rev L 3656B W1 Cal Ver Kit 2300 584 R PVS UG...
Page 277: ......
