7-9 Restart Method for Untested Frequency Band
2300-584-R Software with the Lightning ME7808A/B/C
7-14
PN: 10410-00286 Rev. L
3656B W1 Cal/Ver Kit & 2300-584-R PVS UG
7-9
Restart Method for Untested Frequency Band
After both the Matched Thru and Mismatched Thru have passed the tests and the data is saved to disk, it is
necessary to retest them in the frequency band that has not been tested (either 40 MHz to 65 GHz or 65 GHz to
110 GHz).
42.
Ensure that the calibration data and verification results of the previous test have been saved to the
floppy disk before proceeding.
43.
To perform the set of tests for the next frequency range, select
Restart
on the
Main Menu
to see the
following display:
44.
Select the
Full Restart
to restart the program from the beginning of the program initialization as shown in
“Starting the Program and Initializing” on page 7-3
.
45.
On the
Setup Menu
, repeat the data entry for the following items:
a.
Enter the
User Name
.
b.
Enter the
GPIB Board 0.
c.
Enter the
GPIB Address 6
.
d.
Enter the
VNA Model Number.
e.
Enter the
Test Set Serial Number.
f.
Enter the
Cal Kit Type
selection.
g.
Enter the
Cal Kit Serial Number
selection.
h.
Enter the
Load Cal Kit Disk from VNA Floppy
selection.
Figure 7-20.
Choose the Restart Method Dialog Box
Summary of Contents for 3656B W1
Page 2: ......
Page 12: ...Contents 10 PN 10410 00286 Rev L 3656B W1 Cal Ver Kit 2300 584 R PVS UG...
Page 277: ......
