ComBi
line
05/04
75
12.4.6 Switching on the container heating
automatically (menu 3.8)
When starting a coffee making process the appliance
automatically switches the right container heating on.
The container heater then stays switched on and must always
be switched off manually. You can switch this function off if
required. See fig. 27.
Select the required choice and confirm your changes with the
START button
or go back without saving any changes by
pressing the STOP button
.
12.4.7 Coffee making descale indicator settings
(menu 3.9)
Before you start using the appliance you must first set the
descale indicator.
•
The default descale indicator is set to 1000 litres
(average water hardness) and has a scope of 0 to 9999
litres in steps of 100
•
Use the table 5 below and select the relevant water
hardness in the left column (°D). On the right you can
read after how many litres (recommended) the system
must be descaled.
•
Once the set amount of litres has been reached a
spanner symbol will appear in the display. The appliance
will continue to work normally so that descaling can be
done at a more suitable time.
•
In the Descaling menu 1.0 you can see how many litres
away from a descale indicator signal the system still is.
Table 4.
Selection buttons unit jugs
CB 20
CB 10
CB 5
Model
20-40-60-80
10-20-30-40
4-12-16-20
Factory
settings
16 - 80
jugs
8 - 40
jugs
4 - 20
jugs
Settings scope
jugs = 250 ml
1 jug
1 jug
1 jug
Step
Auto container heating
Fig. 27
Coffee making descale
Fig. 28
indicator settings
Table 5.
Water hardness
Average
Soft
Very soft
Hard
Very hard
Water
quality
8-12
4-8
0-4
12-18
18-30
Hardness
°D
15-22
7-15
0-7
22-32
32-55
°F
1,4-2,2
0,7-1,4
0-0,7
2,2-3,2
3,2-5,3
mmol/l
268-214
72-268
0-72
214-321
321-536
mgCaCo3/l
1000*
1500
2000
500
250
Descale
indicator
litres
* Standard settings
