05/04
ComBi
line
52
4.
FIRST TIME USE
The instructions given in chapter 3-INSTALLATION must be carried out before the new appliance can be put into
operation. This appliance may only be used in combination with the supplied coffee container(s) and synthetic
filter(s).
-
When used for the first time the appliance works according to the standard factory settings.
The various settings can be altered by trained, authorized personnel. See chapter 11-Operator menu.
-
This chapter will explain the coffee brewing and hot water system process:
when the appliance is used for the first time.
when the appliance has not been used for more than 1 week, for example after a holiday period.
4.1
Flushing the flow heater system
1.
Open the water tap and check if the swivel connections are not leaking.
2.
Put the cable with inlet plug into the back of the container (fig. 1-16) and insert the plug into the socket
of the flow water heater (fig. 1-1).
3.
Check if the containers are positioned correctly, with a filter unit (still without coffee), and position the
swivel arm above the centre of the filter.
4.
Switch the appliance on by putting the ON/OFF switch (fig. 1-2) in position I, the display (fig. 1-5.2)
lights up and you will hear a beeping sound. Then the display will indicate the standard choices.
5.
Press selection button 2 (fig. 1-5.4) and confirm your choice by pressing the START button (fig. 1-5.7).
The coffee system starts filling and the brewing process starts. In the display appears the text:
BREWING
.
With the STOP button (fig.1-5.1) the brewing process can be interrupted at any moment. When the water
supply stops coming out of the swivel arm, you will hear a beeping sound (1x short). In the display appears
the text:
LEAKING
. The leaking time is set as standard to approx. 5 minutes, and its ending is indicated by
a beeping sound (3x short).
6.
Empty the container with the drainage tap (fig. 1-15).
7.
Position the swivel arm above the other filter and follow the above procedure once again if the model is
equipped with two containers.
8.
Once the container is empty the coffee maker is ready for use.
4.2
First settings operator menu
The following details are set in the operator menu immediately after being used for the first time.
Please note: The default language setting is English.
To gain access to the operator menu see chapter 11.
System settings
(menu 2)
2.0
Language
See 12.3.1
2.1
Time
See 12.3.2
2.2
Date
See 12.3.3
Coffee stettings
(menu 3)
3.9
Descale indicator
See 12.4.7
3.10 Coffee dosing
See 12.4.8
You can study the remaining operator menu settings later.
The appliance is now ready for use.
