11.
Solder Q2 (32.768kHz crystal, no polarity). Important, push the crystal
ONLY half way down into the board. Solder and trim excess leads from
back of PCB. Then, gently bend crystal down against PCB to match
diagram on PCB.
10
As best as
possible, ensure
headers are
soldered so they
are straight and
upright. You do not
want them to be
crooked
Push the Q2
(32.768 kHz
crystal) ONLY ½
down into the
board so that half
of the leads can be
seen from the top
of the board
