Andres Industries TILO-3M, Manual

Page: 27 / 29

53 52
Troubleshooting
Problem Cause Solution
Device can‘t be
turned on /
Device doesn’t shut off
Batteries empty or incorrectly
installed? Check battery position or replace
battery.
Screen too dark? Push button 1 several times.
Flap defective or turn off?
Open the flap and press and hold
keys 1&2 simultaneously (1s).
Device may be located in the
Video mode PAL or NTSC? Press button 1 for 8 seconds.
(
more p. 42 )
Bad image quality
– Device is in manual calibration
mode?
– Device has been running very long
or is warming up otherwise?
– Calibration has been interrupted.
– Battery almost empty?
Carry out manual calibration, close
the flap for approx. 0.5
s, but do
not lock.
Insert new battery.
Device doesn‘t start
despite battery inserted?
Software crash
Remove the battery for 30 s and
reinsert.
Screen bright, but no
image visible Shutter is locked. Occurs with weak
batteries. Switch off the device and switch it
on again. Insert new battery.
Repair
If there is a defect in the device, please write us an
e-mail with the purchase date and the invoice copy
before sending it to us for repair.
info@andres-industries.de
You will then receive an RMA number. If the repair
takes place within the warranty period, we cannot
guarantee that you will get back your device. In ge-
neral, you will receive an updated version with the
latest software.
Of course with a new housing.
Update-Service
Our products are constantly being further de-
veloped. TILO is also continuously developing
further. To ensure that your TILO is always up-to-
date, we also offer a fee-based update service. You
can then send your TILO to us and we update both
hardware and software. Finally, the device is still
tested for water tightness and is filled with a fresh
nitrogen filling, then you get it back updated. Please
visit our website for more information.
TILO-3™ Thermal Headlamp
Model TILO-3M™ TILO-3Z™ TILO-3Z+™
Order 380101 380103 380104
Usergroup military only
civil customers
Resolution
Microbolometer
320
×
256 Pixel 60 Hz 320
×
256 Pixel 60 Hz 320
×
256 Pixel 60 Hz
Temperatur resolution <40 mK <60 mK <40 mK
Radiometric — — —
Zoom (digital) 0,8
×
,1
×
, 2
×
, 4
×
, 8
×
Optical magnification 1
×
Spectrum / Pixel pitch 7,5–13,5 µm / 12 µm uncooled microbolometer
Suitable for sun light looking directly into the sun is possible for short periods
Filter mode
(Boost) White Hot, (Boost) Black Hot, (Boost) Red Hot, (Boost) Cold Red,
(Boost) Cold Green, Rainbow, Rainbow HC, Iron Bow, Glowbow, Hottest
Video-Output PAL/NTSC n.a. PAL/NTSC
Display (OLED) Resolution color 873
×
500 Pixel
Field of View horizontal 24° / vertical 19°
Battery
1
×
CR123
Light only up to 24 h
thermal only about 3:15 h about 3:30 h
about 3:15 h
Battery 2
×
CR123 (thermal) about 7:15 h about 7:30 h about 7:15 h
rech. Li-battery 16650 about 6:30 h about 6:45 h about 6:30 h
Helmet Mount adapter for ballistic helemts optional
Head Mount Head Mount adapter and head band optional
Light (three colors)
white: (boost: 160 ANSI lumes) normal 45 ANSI lumes,
red (626 nm): 24 ANSI lumes,
IR (940 nm): 15 ANSI lumes
Flashing, SOS yes
Brightness control in 10 steps
Temperature
operating: – 30 ° to +60 °C
storage: – 40 ° to +80 °C
operating: – 20 ° to +60 °C
storage: – 40 ° to +80 °C
operating: – 30 ° to +60 °C
storage: – 40 ° to +80 °C
Water resistance IP 68 IP 65 IP 68
Shock resistance MIL 810F 516 IV (26 drops from 1,22 m / 4 ft)
Material
housing: polyamid, cold
break resistant, reinforced
with nanotubes; color oli-
ve; cover eyepiece made
of crystal sapphire
housing: polyamid, color
black; cover eyepiece made
of hardened PMMA-plastics
housing: polyamid, cold
break resistant, reinforced
with nanotubes; color black;
cover eyepiece made of
crystal sapphire
Dimensions length: 40 mm; width: 64 mm; hight: 67 mm (without accessories e.g. eye cup)
Weight approx. 100 g w/o accessories
Technical specifications