AD-4402 Page
65
Advise
Using the automatic switch of normal batch and loss-in-weigh.
Specify the output terminal for the hopper number in the material code on the I/O.
Specify the input terminal to change the mode on the I/O. [
1n f-
nn] [
9
]
Connect the output terminal to the input terminal.
Connect the output common terminal to the input common terminal.
Set the delay time above 0.1 second at [
5qf-32
]
Batch start delay timer
.
0
Displayed value
Dribble flow, Output
Batch finish, Output
Over, Output
Under, Output
Medium flow, Output
Full flow, Output
Material code, Input
Eval delay timer
Stable, Output
OK, Output
Net weight
Gross weight
5qf-37
Free fall
Preliminary
Optional preliminary
Zero band
Tare command, Input
Final value
Full
Comparison
Start command, Input
Waiting timer
and stable.
Set the condition
at
5qf-13
If this command is
used, total and
comparison can be
used.
Full value
- Final value + Optional preliminary
- Final value + Preliminary
- Final value + Free fall
- Final value
or -Target weight
The active code is
only read at each
start. And keep it.
Dribble flow comparison interrupt timer
Medium flow comparison interrupt timer
Full flow comparison interrupt timer
5qf-33
5qf-35
5qf-34
5qf-43
Batch finish output
on
Select a mode
at
5qf-05
