AD-4402 Page
27
6.1.5.
6.1.5.
6.1.5.
6.1.5.
Editing Full Parameters of a Material Code
Editing Full Parameters of a Material Code
Editing Full Parameters of a Material Code
Editing Full Parameters of a Material Code
A material code consists of the following parameters.
Name
Display Name
Display
Symbol
Display
Example
Memory
Material Code
Code
Code
11
Material name
Mat Name
grain
Material Hopper No.
Mat Hopper
Hopper 1
Final
Final Final
10.00
kg
Free Fall
Free Fall
FFall
0.01 kg
Preliminary
Preliminary Plm 1.00
kg
Optional Preliminary
OP.Preliminary OPPlm 2.00
kg
Over
Over Over
0.10
kg
Under
Undr Undr
0.10
kg
Zero Band
Zero Band
0Band
0.02 kg
Full
Full Full
0.05
kg
Tare
Tare Tare
5.00
kg
Supplementary Flow Open Timer
SF open timer SFOT
0.00 s
Supplementary Flow Close Timer
SF close
SFCT
0.0 s
Automatic Free Fall Range
AFFC range
AFFC
0.00 kg
Initial Dribble Flow
Initial DF
IDF
0.00 kg
Initial Medium Flow
Initial MF
IMF
0.00 kg
Backed up
RAM
( factory
setting)
or
flash
memory
Total Weight
Tot Tot
10.00
kg
Total Count
Tot# Tot#
1
Backed up
RAM
These parameters are stored in backup memory even without power.
Refer to the backup method [
0tHf-11
] of the function list.
Caution
If the flash memory is selected for memory backup [
0tHf
0tHf
0tHf
0tHf-
--
-11
11
11
11
], the current
built-in automatic program mode is stopped.
Edit a Material Code
Step 1 Press and hold the
ENTER
key and press the key.
Then
menu
MatEdit
blinks.
Step 2 Press the
ENTER
key to enter the material code edit. Then menu
Edit
blinks.
Step 3 Press the
ENTER
key to enter menu edit.
Step 4 Select the material code using the
numerical
keys and press the
ENTER
.
Step 5 Enter the material name using the
alpanumerical
keys and press the
ENTER
key.
Step 5 Edit other parameters using the
numerical
keys,
ENTER
key and key.
Step 6 If you want to finish the change, press the
ESC
key several times to return to the
weighing mode.
