Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
1 INTRODUCTION
1.1Attention
Do not disassemble the device. If the device is damaged, the power supply cables
are not isolated or the isolation is damaged, before unplugging the power supply, do
not touch the device.
All wireless data transferring devices produce interference that may affect other
devices which are placed nearby.
The device may be connected only by qualified personnel.
The device must be firmly fastened in the predefined location.
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning storm are prohibited.
Recommended internal battery lifetime is one year. After that, it is recommended to
change the battery to achieve the indicated functionality.
1.2 Instructions of safety
This chapter contains information on how to operate TS100W safely.
By following these requirements and recommendations, you will avoid dangerous situations.
You must read these instructions carefully and follow them strictly before operating the device!
The device uses a 9V...36V DC power supply. The allowed range of voltage is 9V...36V
DC Power.
To avoid mechanical damage, it is advised to transport the TS100W device in an
impact-proof package. Before usage, the device should be placed so that its LED indicators are
visible, which show the status of operation the device is in.
When connecting the (2x9) cables to the vehicle, the appropriate jumpers of the power supply
of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x9 connector must be disconnected.
