Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
• Save to File:
Click this button to save manually entered setting to a file.
• Get IMEI:
Read TS100W modem IMEI (International Mobile Equipment Identity) number. Note, that
after you connect device to power supply, it takes several seconds to load modem – only then
Configurator is able to read it. Otherwise it will be displayed as 'none'.
•
COM port:
Click this drop-down list to choose which COM port is used by TS100W to connect to PC.
See chapter 0 to find out number of the port.
• Refresh button:
Click it to refresh all available ports on PC. This button is used when you connect
TS100W to PC
6.1.2 GPRS Parameters:
GPRS parameters are common settings for device connection with Server via TCP/IP. It
includes APN (user name and password if it has), Server IP and port, Device ID.
• APN:
(Access Point Name) this is operator provided parameter and is used to open GPRS
connection in 3G/4G network. Please contact your 3G/4G operator to find out your APN.
• Username:
APN username used to open GPRS connection in 3G/4G network. In some cases it is
not required and field is left blank.
• Password:
APN password used to open GPRS connection in 3G/4G network. In some cases it is
not required and field is left blank.
• IP1(2):
This is destination server IP address to which TS100W is sending data using GPRS.
TS100W support device configure two IP addresses. But it will use IP1 in priority for
connection. If IP1 is not available or not reachable, it will switch to use IP2 IP address for
data sending as backup.
• Port1(2):
This is destination server port number to which TS100W is sending data using GPRS.
