Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
Working Logic: ACC ON for more than 15minutes but not moving, device will generate one
alarm event and report to server.
8 Debug and Test Modes:
TS100W is able to transmit its current status when connected to PC via USB Port cable. It is used
to detect errors and provide information to possible solutions when device operates as unexpected.
Please use the TS100W configuration software tool and click "Log and Test" button to have debug
data.
9. Installation Recommendations:
9.1 Connecting Wires
• Wires should be connected while module is not plugged in.
• Wires should be fastened to the other wires or non-moving parts. Try to avoid heat emitting and
moving objects near the wires.
• The connections should not be seen very clearly. If factory isolation was removed while
connecting wires, it should be applied again.
• If the wires are placed in the exterior or in places where they can be damaged or exposed to heat,
humidity, dirt, etc., additional isolation should be applied.
• Wires cannot be connected to the board computers or control units.
