Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
1) Data Report Condition
This data report means device send position data updates to server via GPRS.
•Update Time Interval:
The device sends frequency every xx seconds.
•Update Distance Interval:
The sending frequency every xx Meters which the vehicle moved
•Update Moving Angle:
When the vehicle's moving direction is bigger than the angle of original xxx degrees, it
will send once data.
2) Alarm Alert Parameters:
•Speed Limit:
This will setup the vehicle's speed limit. If speed value is bigger than this limit,
device will generate an alarm event.
•Engine Idle time:
If the device detects vehicle is with engine on for more than this time but without
moving, it will generate an alarm events.
•Movement Sensor:
This parameter is to setup the movement sensor sensitivity. We suggest put it as
150-300 value which is less means high sensitivity, and bigger means low sensitivity.
TS100W built-in movement sensor is a type for shocking trigger. The MCU calculates
the shocking times every second to know how big the impact occurred.
•Alarm Buzzer:
This alarm buzzer can be use for two applications:
a. When speed limit is broken, device will send a signal to buzzer and drive it keep
beeping.
b. When user send *1234*L# SMS command to device, it also drive the buzzer to
sound 15seconds.
ON: activate the buzzer sounding function;
Off: deactivate the buzzer sounding function.
•Door Status Detection:
It’s used for different vehicle type for door open trigger.
Like if your vehicle door open output a negative signal, you need configure this as Low.
If your vehicle door opens with positive signal output, you need to configure this as
"High"
