Copyright © 2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
7.1.14 Setup Angle-based Report Angle Parameter
Function
SMS Command Format
Device Reply SMS
Setup Angle-based
Report Angle Parameter
*UPWD*CR:XXX#
CR:xxx Report on!
Example Command:
*GPWD*CR:90#
Example Reply:
CR: 90 Report on!
Note:
-
Xxx value ranges 00-360, when xxx=00, means function off.
-
Unit is degree
7.1.15 Sleep Mode setting:
Function
SMS Command Format
Device Reply SMS
Activate Simple Sleep
*1234*SL*O#
Simple Sleep Activated!
Activate Deep Sleep
*1234*SL*A#
Deep Sleep Activated!
Deactivate Sleep
*1234*SL*C#
Sleep Deactivated!
7.1.16 Activate SMS working mode:
Function
SMS Command Format
Device Reply SMS
Activate SMS
Working Mode
*UPWD*SMS #
SMS Mode Activated!
Note:
-
When device get into SMS working mode, device will not try to login GPRS even with
Server Parameter like IP/Port/APN etc inside the memory
-
In SMS working mode, device functions same exclude GPR connection, it can receive sms
and incoming calls.
7.1.17 Activate SMS+GPRS Working mode:
Function
SMS Command Format
Device Reply SMS
Activate SMS +GPRS
Working Mode
*UPWD*SMS+GPRS #
SMS+GPRS Mode Activated!
Note:
-
In SMS+GPRS working mode, when GPRS is not available, device automatically switches to
SMS as data sending method. But it’s data report interval will not be same as GPRS logic. It
sends report once per hour.
-
In SMS+GPRS working mode, GPRS is always in priority to be used as data sending
method.