Sub MkIIIF
User Manual
Int. Approved
Document ref: ASF3-800-08
November 2018
Page 49 of 79
Copyright © 2009 Analox Ltd. All Rights Reserved.
Commercial in Confidence
8
Function Keys
When first powered up, the operator console defaults to the top menu. There are 5 function keys,
each one selecting a different option. The function of each key is shown on the bottom line of the
display. Pressing any of the keys will cause a new menu to appear, re-assigning the option
available on each key. At lower menu levels F4 and F5 function keys are sometimes assigned to
TOP and BACK.
BACK will always go back to the previous menu. Ultimately, repeated pressing of BACK will get
back to the top menu. Alternatively, when a TOP function is provided, a single key press of TOP is
a quick way to go back to the top main menu.
For menus on which there are more options than can be assigned to the five keys, a MORE key
allows more options to be shown.
For sake of clarity on the diagrams that follow, the BACK and TOP functions are not drawn
On some menus there are blank keys which have no option. These are assigned to other functions
in different products that use the same software.
If a system is left for a prolonged period without pressing any keys, it will revert to the top level
main menu automatically.
8.1
Top Level Main Menu
SETUP
TOP: MAIN MENU
CALIB
ALARM
SETPNT
CONTROL
At the top level menu, the functions available are
Key
Function
Comment
Refer Section
F1
Setup
the date and time to be set, and
access to test functions
F2
Alarm Set-point
Adjust alarm set-points for all
sensors
F3
Calibration
Calibrate function for each
sensor
F4
Control
System control
F5
A ‘hidden’ menu
item exists on F5. Maintain F5 pressed, and then press the backlight button.
Version details of the Operator Console (DCM) and the Remote sensors, together with the version
of their configuration files will be displayed.
Summary of Contents for Sub Mk III F
Page 2: ......
