Sub MkIIIF
User Manual
Int. Approved
Document ref: ASF3-800-08
November 2018
Page 39 of 79
Copyright © 2009 Analox Ltd. All Rights Reserved.
Commercial in Confidence
7.3
Remote Sensor Displays
REM1
REM2
REM3
Text alongside the display indicates the type of reading (CO2, Oxygen, Pressure/Depth,
Temperature or Humidity) and the units of measurement.
Readings on the displays will alternate with fault or alarm messages if there are any faults or
alarms detected. A simple priority sequence is assigned in the case where there are multiple faults
or alarms present. For instance if a sensor is showing a low alarm but also a sensor fault alarm,
then the fault alarm would display since it has a higher priority.
ALARM
FAULT
OXYGEN
%
INJ
INJ
OXYGEN
mbar
SUB MKIIIF REM3 CONTROLLER
REM3
CONTROL
SETPOINT
Summary of Contents for Sub Mk III F
Page 2: ......
