Sub MkIIIF
User Manual
Int. Approved
Document ref: ASF3-800-08
November 2018
Page 37 of 79
Copyright © 2009 Analox Ltd. All Rights Reserved.
Commercial in Confidence
j)
The displays will then revert to show the sensor readings with the backlights turned on (if
enabled).
k)
The operator console may determine that it is necessary to download a configuration to
the sensor module. During this sequence, each of the displays will show “Con0”.
Additional messages may appear if there are faults in the configuration process.(Con1
through Con 9
–
report to Analox).
l)
If the configuration works correctly, the displays should then revert to normal sensor
readings
7.2
Main Display Screen
The Main Display screen will show readings and alarm values for the attached remote sensors. An
example is shown below:
Summary of Contents for Sub Mk III F
Page 2: ......
