Sub MkIIIF
User Manual
Int. Approved
Document ref: ASF3-800-08
November 2018
Page 15 of 79
Copyright © 2009 Analox Ltd. All Rights Reserved.
Commercial in Confidence
6.2
Mechanical Installation
6.2.1
Operator Console Mechanical Installation
The standard Operator Console is designed to be panel mounted as shown below. The shaded
area represents the aperture into which the Operator Console will fit. 10mm diameter mounting
holes will accept the M5 fixings supplied with the system.
2 4 0
2 2 5
2 07
OUT L I NE OF F RONT PANEL
SH ADED AREA REPRESENTS
APERTURE INTO WH IC H
INSTRUMENT WILL FIT
Ø10.00
117
129
133
PANEL MOUNTING DETAIL
NOTE:
ADDITIONAL SPACE WILL BE REQUIRED BEHIND THE UNIT
FOR THE MATING CONNECTORS.
NOTE:
THE CONSOLE IS USUALLY SUPPLIED WITH A PROTECTIVE
FILM OVER THE FRONT PANEL LABEL AND DISPLAY VIEWING
WINDOW. THIS PROTECTIVE FILM IS INTENDED TO BE
REMOVED TO PROVIDE BETTER VISIBILITY OF THE DISPLAY.
NOTE:
A NON-STANDARD OPERATOR CONSOLE IS ALSO AVAILABLE
WHICH IS BUILT INTO A DIECAST ALUMINIUM IP65 RATED
ENCLOSURE. MOUNTING DETAILS ARE AS SHOWN USING M6
SCREWS.
Summary of Contents for Sub Mk III F
Page 2: ......
